DiggerData.com
Skid Steer Loaders - Compact Track Loaders - Mini Loaders - Bulldozers
Home
Compare skid-steers
Contact

Gehl
  - skid steers
  - track loaders




Gehl CTL70 compact track loader
General compact track loader information: Gehl CTL70  compact track loader preview image
 Manufacturer:Gehl
 Model:CTL70
 Type:compact track loader
 Years produced:unknown
Performance:
 Engine power:81 hp [60.4 kW]
 Rated operating capacity:
 Operating capacity (35% tip):2083 lbs [944 kg]
 Operating capacity (50% tip):2976 lbs [1349 kg]
 Bucket width:74 inches [187 cm]
 Bucket capacity:20.4 cf [0.578 m3]
 Reach:34.4 inches [87 cm]
 Tipping load:5952 lbs [2699 kg]
 Breakout force - bucket:7401 lbs [3357 kg]
 Breakout force - boom:7425 lbs [3367 kg]
 Breakout force - boom (opt):7425 lbs [3367 kg]
Dimensions: compact track loader side profile

compact track loader top profile
 Length:116.1 inches [294 cm]
 Total length:146 inches [370 cm]
 Height:85.3 inches [216 cm]
 Max height:
 Pin height:123 inches [312 cm]
 Wheelbase:
 Ground clearance:12.8 inches [32 cm]
 Width:69.7 inches [177 cm]
 Weight:9590 lbs [4350 kg]
Hydraulics:
 Flow:19.8 gpm [74.9 lpm]
 Pressure:2988 psi [206.0 bar]
 Power:
 Reservior capacity:13.7 gal [51 L]
Engine:
 Type:Isuzu 4JG1T
liquid-cooled turbo
 Power:81 hp [60.4 kW]
 Cylinders:4
 Bore/Stroke:
 Displacement:187 ci [3.1 L]
 Compression:
 Rated RPMs:2400
 Torque:190 lb-ft [257.6 Nm]
 Oil capacity:2.5 gal [9 L]
 Coolant cap.:4 gal [15 L]
Electrical:
 Alternator amps:50
 Battery:12-volt 660 cca
Drive:
 Max speed:4.5 mph [7.2 kph]
 Max speed (two-speed):6.4 mph [10.3 kph]
 Track width:18 inches [45 cm]
 Ground pressue:4.1 psi [0.3 bar]
 Track on ground:59 inches [149 cm]
 Turn radius:
Page information:
 Last update:October 1, 2008
 Copyright:© 2006-2008 - TractorData LLC
 Contact:Peter@TractorData.com
 Notice:Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before operating equipment or attempting any service or repair.