 |
John Deere 325 skid steer loader
 |
| General skid steer loader information: |
 |
 |
| | Manufacturer: | John Deere
|
 |
| | Model: | 325
|
 |
| | Type: | skid steer loader
|
 |
| | Years produced: | 2000 - 2004
|
 |
| Performance: |
 |
| | Engine power: | 76 hp [56.7 kW]
|
 |
| | Rated operating capacity: | 2500 lbs [1134 kg]
|
 |
| | Bucket width: | 72 inches [182 cm]
|
 |
| | Bucket capacity: | 22.6 cf [0.640 m3]
|
 |
| | Reach: | 34 inches [86 cm]
|
 |
| | Tipping load: | 5000 lbs [2268 kg]
|
 |
| | Breakout force - bucket: | |
 |
| | Breakout force - boom: | |
|
|
 |
| Dimensions: |
 


|
 |
| | Length: | 115.5 inches [293 cm]
|
 |
| | Total length: | |
 |
| | Height: | 80.9 inches [205 cm]
|
 |
| | Max height: | |
 |
| | Pin height: | 125 inches [317 cm]
|
 |
| | Wheelbase: | 47.6 inches [120 cm]
|
 |
| | Ground clearance: | |
 |
| | Width: | 73.7 inches [187 cm]
|
 |
| | Weight: | 8390 lbs [3805 kg]
|
 |
| Hydraulics: |
 |
| | Flow: | 22 gpm [83.3 lpm]
|
 |
| | Pressure: | 3100 psi [213.7 bar]
|
 |
| | Power: | |
 |
| | Optional flow: | 34 gpm [128.7 lpm]
|
 |
| Engine: |
 |
| | Type: | John Deere 5030T liquid-cooled turbocharged diesel
|
 |
| | Power: | 76 hp [56.7 kW]
|
 |
| | Cylinders: | 5
|
 |
| | Bore/Stroke: | |
 |
| | Displacement: | 186 ci [3.0 L]
|
 |
| | Compression: | |
 |
| | Rated RPMs: | 2800
|
 |
| | Torque: | |
 |
| | Oil capacity: | |
 |
| | Coolant cap.: | |
 |
| Electrical: |
 |
| Drive: |
 |
| | Max speed: | 7 mph [11.3 kph]
|
 |
| | Max speed (two-speed): | 11 mph [17.7 kph]
|
 |
| | Front tire: | 12.00x16.5
|
 |
| | Rear tire: | 12.00x16.5
|
 |
| | Front tire (opt): | |
 |
| | Rear tire (opt): | |
 |
| | Turn radius: | |
 |
| Page information: |
 |
| | Last update: | September 30, 2009
|
 |
| | Copyright: | © 2006-2009 - TractorData LLC
|
 |
| | Contact: | Peter@TractorData.com
|
 |
| | Notice: | Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before operating equipment or attempting any service or repair.
|
 |
|
|