 |
John Deere 328 skid steer loader
 |
| General skid steer loader information: |
 |
 |
| | Manufacturer: | John Deere
|
 |
| | Model: | 328
|
 |
| | Type: | skid steer loader
|
 |
| | Years produced: | 2005 - 2009
|
 |
| Performance: |
 |
| | Engine power: | 82 hp [61.1 kW]
|
 |
| | Rated operating capacity: | 2750 lbs [1247 kg]
|
 |
| | Bucket width: | 72 inches [182 cm]
|
 |
| | Bucket capacity: | 22.6 cf [0.640 m3]
|
 |
| | Reach: | 32 inches [81 cm]
|
 |
| | Tipping load: | 5500 lbs [2494 kg]
|
 |
| | Breakout force - bucket: | |
 |
| | Breakout force - boom: | |
|
|
 |
| Dimensions: |
 


|
 |
| | Length: | 115.5 inches [293 cm]
|
 |
| | Total length: | |
 |
| | Height: | 82.9 inches [210 cm]
|
 |
| | Max height: | |
 |
| | Pin height: | 127 inches [322 cm]
|
 |
| | Wheelbase: | 47.6 inches [120 cm]
|
 |
| | Ground clearance: | |
 |
| | Width: | 76.1 inches [193 cm]
|
 |
| | Weight: | 8580 lbs [3891 kg]
|
 |
| Hydraulics: |
 |
| | Flow: | 22 gpm [83.3 lpm]
|
 |
| | Pressure: | 3100 psi [213.7 bar]
|
 |
| | Power: | |
 |
| | Optional flow: | 36 gpm [136.3 lpm]
|
 |
| Engine: |
 |
| | Type: | John Deere 5030T liquid-cooled aftercooled turbo diesel
|
 |
| | Power: | 82 hp [61.1 kW]
|
 |
| | Cylinders: | 5
|
 |
| | Bore/Stroke: | |
 |
| | Displacement: | 186 ci [3.0 L]
|
 |
| | Compression: | |
 |
| | Rated RPMs: | 2800
|
 |
| | Torque: | |
 |
| | Oil capacity: | |
 |
| | Coolant cap.: | |
 |
| Electrical: |
 |
| Drive: |
 |
| | Max speed: | 7 mph [11.3 kph]
|
 |
| | Max speed (two-speed): | 12 mph [19.3 kph]
|
 |
| | Front tire: | 14.00x17.5
|
 |
| | Rear tire: | 14.00x17.5
|
 |
| | Front tire (opt): | |
 |
| | Rear tire (opt): | |
 |
| | Turn radius: | |
 |
| Page information: |
 |
| | Last update: | September 30, 2009
|
 |
| | Copyright: | © 2006-2009 - TractorData LLC
|
 |
| | Contact: | Peter@TractorData.com
|
 |
| | Notice: | Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before operating equipment or attempting any service or repair.
|
 |
|
|